Navigation Reference Unit with 12 precision sensors
True heading, magnetic heading, deviation, variation, roll, pitch, UTC time and date, position, satellite information, ground speed, course over ground, air pressure and temperature
72-ch. GNSS (GPS/GLONASS/BeiDou) satellite receiver with SBAS corrHection
Standard (figure 8-pattern) and Adaptive deviation calibration algorithm
Simultaneously NMEA 0183 and NMEA 2000
Configurable NMEA 0183 sentences (enable/disable, talker ID, output rate)
Easy configurable NMEA 2000 termination resistor (open or terminated)
Easy configurable NMEA 0183 data rate (4800 or 38400 baud)
Each unit is factory calibrated and functional tested over temperature prior to shipment
Worldwide maritime certification
Certification & standards: CE, IEC 60945, IEC 60950, EN 300440-2, FCC, IC, RCM, RoHS, NMEA 0183, NMEA 2000
Dimensions, with pole mount: 151.4 x 81.65 x 128.0 mm (5.96 x 3.21 x 5.04 in.)
Weight, with pole mount: 240 g (0.53 lbs)
Temperature (ambient), operational: -40°C to +55°C (-40°F to +131°F)
Temperature (ambient), storage: -40°C to +85°C (-40°F to +185°F)
Waterproof: IP46 / Humidity: 95% non-condensing @ 40°C
Communication Interface: 8-pin female connector for NMEA 0183, NMEA 2000 and power
Input power: 9-40 VDC
Power consumption: < 1W
Load Equivalent Number (LEN): 2
Compass safe distance: 0.3 m (1 ft)
LT-1000 NRU
Pole & Roof Mount
10m Cable Multi 8-pin Simple-Cut (M)
Screw-in Conn. NMEA 2000 Micro-C (M)
Quick Installation Guide
Safety Instructions Sheet
Unit Test Sheet
The LT-1000 Navigation Reference Unit (NRU) is a maritime heading sensor with built-in GNSS/GPS receiver from Lars Thrane A/S. The LT-1000 NRU is designed for the leisure as well as the professional maritime markets. The LT-1000 unit meets all standards and certification requirements needed for worldwide maritime navigation equipment.
The LT-1000 NRU is a small, compact, and very advanced unit with 12 precision sensors (magnetometers, gyros, accelerometers, barometer, thermometer, and GNSS/GPS receiver). With the use of sensor-fusion and Kalman filtering, the LT-1000 NRU outputs: true heading, roll, pitch, position, ground speed, course over ground, air pressure, and temperature in real-time, with high precision and resolution. The LT-1000 NRU includes advanced technologies such as:
Kalman filtering
Calculation of magnetic variation based on the World Magnetic Model (WMM)
Compensation of soft and hard iron (deviation)
Built-in magnetometer calibration algorithm
Receive and track multiple satellite systems (GPS, GPS & GLONASS, or GPS & BeiDou)
Support for Satellite-Based Augmentation System (SBAS): EGNOS, WAAS and MSAS
The LT-1000 NRU makes use of the latest technology within GNSS/GPS receivers, with market leading acquisition and tracking performance.
The LT-1000 NRU is designed and built for the demanding and rough environment at sea and with an operational temperature range from -40⁰C to +55⁰C (-40⁰F to +131⁰F).
INSTALLATION & NAVIGATION
The LT-1000 Navigation Reference Unit is easy to mount on a 1” pole (optional installation: roof mount) with a single cable supporting NMEA 0183, NMEA 2000, and power. The built-in magnetometer calibration algorithm will quickly compensate for heading deviation, and the LT-1000 NRU will output reliable navigation data. An external PC installation and service software is available for optional configuration and maintenance of the LT-1000 NRU.
More than 40 years of experience have been put into the design and construction of the advanced LT-1000 NRU, with an exceptional performance and specification level.