RoIP GATEWAY

VE-PG4

Ensures Cooperative Information Sharing Across Systems and Devices

‍

All in One Package

‍

The VE-PG4 includes built-in RoIP, SIP gateway, IP router, IP PBX and IP communication terminal controller functions, in one box. In comparison with a similar system combining several devices, installation and administration oft he integrated VE-PG4 can be simpler, with less confliction of settings.

‍

‍

‍

‍

‍

‍

‍

‍

‍

‍

‍

‍

Call Recording to a USB Drive

Call Recording to a USB Drive Incoming/Outgoing calls can be recorded to an external USB device connected to the VE-PG4. Up to four recording settings are programmable. The recording call type is selectable from All, Group, and Individual calls. In addition, the Monitor function transfers the received audio data to an intended device.

‍

‍

‍

‍

‍

‍

‍

‍

Microphone Connection for BaseOperation

Connect HM-241, optional speaker-microphone to the microphone connector on the VE-PG4’s front panel to enable simple base operation. Echo canceller and noise canceller functions are built-in for full-duplex communication with IP advanced radio system, like the IP100H, IP501H or IP501M.

‍

‍

‍

‍

Position and Status Information

GPS position and status information from the IP501H/IP501M LTE transceivers can be received and transferred to a PC to track the location of the radio users or a user in avehicle.

_{*GPS mapping softwareis required for GPS data}

‍

Remote Communicator Software,RC-FS10

‍

The optional RC-FS10 remote communicator creates an IP-based virtual radio on a PC, and can communicate with land mobile radios, LTE radios, and IP communication terminals through the VE-PG4.

‍

‍

‍

Serial Pass-through Function

The Serial Pass-through function enables you to connect a serial device to the VE-PG4 to extend the communication range between the connected device and a controller PC. The virtual serial port software for Windows® PC is supplied with the VE-PG4.

‍

‍

‍

‍

‍

‍

‍

‍

SIP Server and IP-PBX Functions

The built-in simple SIP server enables you to assign IP phone numbers with extension groups. The VE-PG4 can be connected to external SIP server as a client. The following IP-PBX settings are programmable.

·  Voice Phonebook

·  DID (Direct InwardDialing)

·  Used with Panasonic KX-UTand KX-HDV series IP phones

·  Call log

·  Extension presence

·  Phone number routing

·  Outside line regulations

·  Caller prioritization

·  External call limiting

·  SIP conferencing

‍

Router Functions with VPN Tunnel

The VE-PG4 supports LAN, DHCP client, Static IP or PPPoE connections. The VPN function creates a secure IP tunnel connection over the Internet.

‍

Half-width 1U Form Design

The VE-PG4 occupies only half the width of a 19-inch rack. It can be functionally installed with repeaters, switching hubs and other equipment. LTE (4G)/3G antenna bases with 1.5 m (4.9 ft) of cable are supplied in case antennas need to be relocated for better reception.

‍

‍

‍

‍

‍

‍

‍

‍

‍

Online Firmware Update

The VE-PG4 supports automatic and online firmware update functions, for remote maintenance. Settings can be saved to a backup file, and easily restored.

‍

Management Features

·  SYSLOG and SNMP

·  Telnet and SSH

·  Ping Test and Traceroute Test

·  Abnormal condition monitoring, such as LAN port link-down and SIP server registration error

·  Administrator password

·  SNTP server

·  Security slot

‍

Rear panel view

‍

‍

‍

‍

‍

‍

‍

‍

‍

‍