Miðhraun 13, 210 Garðabær
The IP-M60 is the world’s*1 first hybrid IP transceiver. Combining two modes in one, VHF marine and LTE communications. VHF marine transceiver, which is commonly used worldwide as a means of maritime safety, and a land-based LTE transceiver that can be used to make calls over any distance within a cellular (LTE) coverage area*2. The IP-M60 can be used offshore, in ports, rivers, and canals where maritime and business communications are required. It can be used in situations such as rescue boats that need to coordinate with search and rescue agencies, as well as in the operation of yacht racing events.
*1 According to Icom research as of February 2024.
*2 Coverage area depends on the LTE network provider.
In Cellular mode, communication is through the carrier’s LTE (or 3G). Calls can be made anywhere within the carrier’s coverage area. In addition, Simultaneous TalkListen™ provides full-duplex communication in Cellular mode allowing users to talk and listen at the same time like a telephone conversation.
This mode works as a VHF marine radio that has the same functions and performance as conventional VHF marine radios, such as Icom IC-M25 or IC-M25EURO. VHF Marineis used to ensure the safety of marine traffic between vessels or vessel-to-coast stations.
Cellular and Marine modes can be used simultaneously (simultaneous reception is possible and audio is MIXED.) PTT buttons for Main and Sub-mode make it possible to select the communication mode assigned to each with one touch. The communication mode can be selected quickly without having to switch modes. Simultaneous transmission on both channels is possible by pressing the PTT buttons for the Main and Sub mode at the same time.
Cellular + Marine Mode offers four sub-modes: “Cellular Main”,“Marine Main”, “Adaptive PTT with Cellular Main”, and “Adaptive PTT with Marine Main”. Below are examples of “Cellular Main“ and “Adaptive PTT with CellularMain“ modes. The same settings can be swapped between Marine and LTE modes.
In the Cellular Main mode, the IP-M60 typically stands by in Cellular mode and initiates calls to cellular groups on pushing the Main PTTbutton. However, if a call is received on a marine channel, the radio temporary switches to the Marine mode to respond on the marine channel.
In this mode, the radio remains in the Cellular mode by default and initiates calls to cellular groups when the Main PTT button is pressed. As the operator moves to preprogrammed marine area (GPS point), the radio automatically shifts to the Marine mode and transmits on a marine channel.
The Relay Mode transfers received marine audio to the IP radio group, vice versa. When the IP-M60 is used in the Relay Mode, no received voice is heard from the speaker.
The Relay function may be prohibited insome countries.
The built-in Bluetooth® unit provides a wireless connection between the IP-M60 and an optional Bluetooth® headset.It also has a VOX function that enables automatic voice transmission in response to your voice, allowing hands-free operation.
Icom’ scustom high-power capacity speaker delivers a loud 1500 mW audio output with advanced acoustic sound clarity for noisy environments.
The IP-M60 is tested to U.S. Military standard environmental tests and dust-tight and waterproof rating of IP67*. It can be used with peace of mind on decks exposed to rain or splashing water, or in dusty conditions such as during ship repairs.
1 meter (3 feet) under water for 30minutes.
Icom’ sunique AquaQuake™ function emits a buzzing sound, shedding water from the speaker grill. The IP-M60 provides clear sound even if it gets wet from rain or waves.
· Noise Canceling function reduces back groundnoise from transmitting voice
· The Automatic Firmware Update and Provisioning function works through an LTE connection
Simply by pushing the Emergency button, an emergency call can be made with an audible warning to a pre-defined destination. In addition to pressing the Emergency button, the Emergency call can be triggered by the Man Down, Lone Worker, and Motion/Stationary functions.
Emergency call functions work in theCellular mode.
Current Status information such as “Break”, “Working” and “Meeting” can be posted and referenced from other radios. In addition, predefined short message (up to 32 characters) can be sent to the talkgroup.
The Vibration Alert function notifies the user that a call or text message is received with a strong vibration. This function can be configured for individual calls, group calls, all calls, or only when receiving text data, depending on how it is used.
The IP-M60 has a recording and playback function, so that if you miss something, you can listen to it again immediately.
Maximum recording: 4 minutes or 10 recordings.
· Priority call with high priority authority
· Dual SIM capability to install two SIM cards at the same time
· One Touch PTT function keeps transmitting while you are talking
· Address book for storing talkgroup IDs
Channel 16 is the international Distress, Emergency and Calling channel. Push the Channel 16 button to monitor the channel.
For example, it is convenient for use in a yacht race, when race announcements are made on a designated channel, while you are monitoring Channel 16 and using other channel.
· Favorite channel scan, Priority channel scan and Auto Scan Start functions
· Weather channel receive rwith a Weather Alert function*
Depending on the transceiver version.